This is the pinout to connect the ISDN/BRI plug from Cisco 2901 to Patton SmartNode 2 x ISDN/BRI.
Continue reading
How to setup an Android Development Environment
In my old post (pls see linkografia) I showed how to setup & configure Android environment to develop apps for Android-powered devices.
Also if the content of the post is still valid I want to update the procedure to use the new bundle “Android SDK + Eclipse con ADT“, that makes installation faster and more accurate.
Configure a LinkSys SPA942 with Asterisk 1.8
In this post I will show you how to connect & configure one IpPhone Linksys SPA942 using an Asterisk Pbx 1.8: I hope this can help you with other similar IpPhones (Linksys SPA942 is in “End-of-sale “)
To start you have to verify the firmware version used by the phone: connect to the web interface on the IpPhone and check the info tab check.
Connect Portech MV-370 using an analog trunk
In this post I will show you how to connect a pbx, with only an analog trunk available, to Portech MV-370 Gateway SIP/GSM, using a Grandstream HT503 gateway SIP/Analog FXO/FXS.
